|
|
| WQ-COND CONDUCTIVITY SENSORS |
|
Conductivity sensors and conductivity recorder to measure water conductivity.
|
|
FEATURES:
- 0.5% conductivity reading accuracy
- Dual 4-20 mA outputs, temperature and conductivity
- Measurement span from 0 to 2 siemens/cm
- Sensor armor available for harsh environments
- Measure conductivity up to 82 feet depth
- Fully encapsulated electronics
|
|
|
Conductivity Sensors Product Description
|
|
The Global Water WQ-COND Conductivity Sensors are suitable for measuring conductivity in a wide variety of applications including
laboratories, streams, rivers, and groundwater. The conductivity sensor's small size and rugged housing make it useful for
hand held measurements or permanent installation.
The conductivity sensors use a 4-electrode measuring technique that provides accurate readings over a wide range of conductivities
and temperatures. Because the conductivity of ionic solutions increases with increasing temperature, a temperature sensor is
also incorporated and is used to provide automatic temperature compensation of 2%/°C normalized to 25°C. An in-line interface
module converts the digital conductivity sensor and temperature data into two separate 4-20mA signals for monitoring with data
loggers and PLC devices.
The standard conductivity sensors come with three feet (one meter) of cable between the conductivity sensor and interface module,
and 25 feet of marine grade cable for connecting to recording devices. Additional cable can extend the length of the
conductivity sensor up to 500 feet. Available conductivity ranges are 0-200µS/cm, 200-2000µS/cm, 2-20mS/cm, 20-200mS/cm and
200-2000mS/cm. The conductivity sensor's temperature output has a measurement range of -5°C to +70°C.
Global Water's GL500-7-2 Conductivity Sensor Recorder adds recording capabilities to the
conductivity sensor. The GL500-7-2 Conductivity Sensor Recorder connects to the conductivity sensor's 4-20mA outputs to record
data. In addition, Global Water offers the PC320 Conductivity Controller to use the
conductivity sensor's output to control pumps or alarms.
|
|
|
Conductivity Sensors Specifications
|
Conductivity Range:
0 to 200 µS/cm
200 to 2000 µS/cm
2 to 20 mS/cm
20 to 200 mS/cm
200 to 2000 mS/cm
Conductivity Resolution:
0.1 µS/cm
1 µS/cm
0.01 mS/cm
0.1 mS/cm
1 mS/cm
Conductivity Accuracy: +0.5% of reading
Temperature Range: 23 to 158°F (-5 to 70°C)
Temperature Resolution: 0.02°F (0.01°C)
Temperature Accuracy: +0.4°F (0.2°C)
Temperature Compensation: automatic (2%/°C normalized to 25°C)
Temperature Response: 99% in <20 seconds
Output: Dual 4-20 mA (Conductivity and Temperature)
Maximum Pressure: 35 psi (82 ft (25m))
Immersion Depth: 1.4 inches (36 mm)
Operating Voltage: 10-36 VDC
Current Draw: 20 mA plus sum of both sensor outputs
Warm Up Time: 12 seconds minimum
Operating Temperature: 23 to +158°F (-5 to +70°C)
Storage Temperature: -4 to +212°F (-20 to +100°C)
Dimensions: 8 inch L x 0.86 inch Diameter (202 mm L x 22 cm Dia.)
Weight: 8 oz (227 g) plus cable
|
|
|
Conductivity Sensors Options & Prices
|
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
|
WQ-Cond Conductivity Sensor
Includes 25 ft of cable. Specify conductivity sensor range when ordering:
WQ-Cond-1 0-200 µS (PN# DCA500)
WQ-Cond-2 200-2,000 µS (PN# DCB500)
WQ-Cond-3 2-20 mS (PN# DCC500)
WQ-Cond-4 20-200 mS (PN# DCD500)
WQ-Cond-5 200-2,000 mS (PN# DCE500)
|
$782 |
|
WQEXC Extra Cable for conductivity sensors (PN# DH0000)
Standard conductivity sensors include 25 ft of cable, but can be purchased with up to 500 ft of cable.
|
$2.10/ft |
|
|
| CONDUCTIVITY SENSORS ACCESSORIES |
|
Conductivity Sensor Plastic Armor (PN# DD0505)
|
$205 |
|
|
Conductivity Sensor Stainless Steel Armor (PN# DD0510)
|
$340 |
 |
EC400 Pocket Conductivity Meter
Includes meter and conductivity cell, protective sensor cap, sample cup with cap, four SR44W button batteries, and 48 inch (1.2m)
neckstrap.
|
$106 |
|
EC410 Pocket Conductivity Meter Kit
Includes an EC400 conductivity tester with sensor, protective sensor cap, 84uS, 1413uS, and 12880uS standards (30mL bottle each),
weighted base, 3 sample cups with cap, four 1.5V button batteries, and 48 inch(1.2m) neckstrap, and carrying case.
|
$152 |
|
EC500 Pocket pH/Conductivity Tester
Includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48 inch (1.2m) neckstrap.
|
$152 |
|
EC510 Pocket pH/Conductivity Tester Kit
Includes an EC500 portable conductivity meter with sensor, 84uS, 1413uS, 12880uS calibration standards, pH buffer pouches (1 each of
4, 7, 10pH plus rinse solution), weighted base, protective sensor cap, 3 sample cups, four 1.5V SR44W batteries, carrying case, and
a 48 inch (1.2m) neckstrap
|
$198 |
|
2X00-001A Vario Cond Temperature Conductivity Meter TetraCon® V Kit
Includes: Vario Cond, mobile case, TetraCon® V cell, and KCl solution.
|
$Call |
|
2CA102 Cond 3110 Set Handheld Conductivity Meter Set
Includes meter, tetraCon 325-3, case & accessories.
|
$Call |
|
|
Lab 960 Benchtop Conductivity Meter
|
$Varies |
|
3C30-010 Cond 1970i Portable Conductivity Meter
Conductivity meter with universal AC power supply.
|
$Call |
|
WQL-Cond Conductivity Datalogger
Conductivity datalogger for remote monitoring.
|
$Call |
|
GL500 Conductivity Sensor Recorder
Conductivity recorder for sensor datalogging. Includes Global Logger Software. With weather proof enclosure and 12V
battery.
|
$932 |
 |
|
PC320 Conductivity Sensor Controller
|
$Varies |
|
|
WQS Conductivity Sampling System
|
$Varies |
 |
|
WQ Water Quality Sensors
|
$Varies |
|
WQMS Water Quality Monitoring System
The standard unit includes a datalogger, temperature sensor, pH sensor, conductivity sensor (with a 0-5000µS range unless otherwise
specified), and DO sensor.
|
$3,205 |
|
|
|
