|
|
| WS705 IMPROVED COMPOSITE/DISCRETE WATER SAMPLER |
|
Portable Composite and Discrete Samplers.
|
|
FEATURES:
- Ideal for wastewater, industrial and environmental sampling
- CE Certified
- Quick disconnect pickup hose conveniently stored inside the enclosure for easy transport
- Simple to operate – no programming required
- Heavy duty wheels and retractable handle built in
- Rugged construction for harsh environments
- Can take timed or flow proportional samples
- Peristaltic pump prevents sample contamination
- Automatic backflush clears pickup strainer and hose
- Enclosed battery compartment and smart battery charger to improve battery life
- Refrigerated/cooler sampler options available
- The easiest and most reliable method for collecting water quality samples
|
|
|
Composite/Discrete Water Samplers Product Description
|
The WS705 single-bottle composite/discrete water samplers combine all the features needed to meet a wide variety of water sampling
requirements, including those for stormwater, industrial discharge, water and wastewater treatment, waste collection systems,
rivers, and streams.
The WS705 composite/discrete water sampler's state of the art water sampler controller gives you complete control over your water
sampling process. With the composite/discrete water sampler's sample size control, you can take individual time-weighted
composite samples or full-bottle discrete grab samples in a 2.5 gallon sample bottle. The composite/discrete water sampler's
sample interval control allows you set the time between individual composite samples or enable the external trigger mode for flow
proportional sampling. A start delay timer allows you to start multiple composite/discrete water samplers in the field at the
same time, or to delay drawing a water sample after a triggering event so that your water sample better represents the water
source.
Samplers Inputs and Outputs
In addition to taking samples automatically, inputs are provided for triggering the composite/discrete water samplers by PLC devices
and other controllers. These inputs include an external trigger input that accepts a switch closure or pulse input, ideal for
flow proportional sampling. Two separate water sensor inputs can be used for monitoring water level in a rain gauge and at the
source using the optional stormwater kit. A pulse output is also provided for using a data logger, such as the
GL500 2-1, or PLC to record when the samples were taken. An automatic 15 second
backflush cycle clears any debris from the composite/discrete water sampler's strainer and empties the water from the hose so the
next composite sample is not contaminated.
Improved Water Sampler Enclosure
The composite/discrete water sampler's rugged rainproof enclosure can be padlocked and/or chained to prevent tampering. The
composite/discrete water samplers are enclosed in a case that can be easily hidden or camouflaged to prevent vandalism. The
samplers are lightweight enough that even with a full sample bottle the composite/discrete water samplers can be suspended, from the
over-molded handle on top, in a manhole for wastewater or stormwater sampling. The compact enclosure features heavy duty
polyurethane wheels and a retractable extension handle for easy transportation. The pickup hose comes with quick disconnect
fittings which allows it to be disconnected from the composite/discrete water sampler and conveniently stored inside the enclosure
when being moved or when not in use.
Sampler Power
The composite/discrete water sampler's 5 AH rechargeable battery will power the sampler for several months or several sampling
events. The sealed gel-cell battery and BC100 smart charge controller are contained in a separate battery box inside the
composite/discrete water sampler's main enclosure to isolate and protect electrical connections. The included smart charger
prevents overcharging and greatly extends battery life over other charging methods. Optional AC and solar panel charging
options are available, see the Composite/Discrete Water Samplers Options & Prices section
for more information.
Overflow Protection
The composite/discrete water sampler's sample bottle is equipped with a float switch that automatically turns off the peristaltic
sampling pump if the water bottle becomes full.
Water Sample Size
The user can adjust the composite/discrete water sampler's sample size to one of 15 composite sample sizes from 50 ml to 2 liters
plus a full bottle discrete setting and the composite/discrete water sampler's sample interval to one of 15 time settings from 5
minutes to 12 hours plus an external trigger mode setting for flow proportional sampling.
Flow Proportional Sampling
An external pulse-type flow meter can control the water sample interval for true flow proportional sampling. Global Water's
Open Channel Flow Monitor has a flow-proportional output signal for triggering the WS705
composite/discrete water samplers. If you already have a flow meter but it has a 4-20mA output, please look at the related
products section of the Composite/Discrete Water Samplers Options & Prices section.
Remote Water Sampling Notification
Attach the AD200 Autodialer or CVD-2000P
Cellular Autodialer to your composite/discrete water sampler to add remote sample notification. This accessory will save you
travel time by ensuring that you always know when your composite/discrete water samplers have taken a sample at your monitoring
sites.
What's Included
The WS705 composite/discrete water samplers come with a 2-gallon polyethylene sample bottle for collecting composite samples, a
peristaltic sampling pump, a circuit board controller, and a rechargeable gel cell battery. Also provided is a sample pickup
hose and a battery charger. Everything you need is provided for a successful wastewater management or environmental monitoring
program.
|
|
|
Composite/Discrete Water Samplers Specifications
|
Operating Temperature: 32° to +158°F (0° to +70°C)
Materials:
Enclosure: Expanded UV protected PVC
Bottle: 2.5 gallon Polyethylene
Pickup Hose: 15 ft (4.6 m) reinforced PVC 1/4 inch ID polyethylene flexible tubing section with 20-Mesh intake strainer and quick-disconnect fittings
Pump Tubing: Norprene 1/4" ID, 7/16" OD
Sample Pump:
Flow Rate: 1000 ml per minute at a 4 foot head
Type: Peristaltic
Maximum Lift: ~20 ft (6 m)
Battery: Rechargeable 5 AH Gel Cell
Battery Life: ~1 hour, continuous pumping under load
Standby: 3 months while still retaining enough power run the pump to capacity
Start Delay: 16 time settings from 0 to 12 hours
Composite Interval: 15 time settings from 5 min. to 12 hours plus an External Trigger mode setting
Sample Size: 15 composite sample sizes from 50ml to 2 liters plus a Full Bottle discrete setting (Approximate sizes at 4 foot head)
External Trigger Input: 250 mS minimum pulse width
Switch closure or 4-30VDC
Pulse Output: 5VDC one-second pulse
1000 ohm output impedance
Bottle Switch Input: Switch closure Input
Floating switch in bottle
Rain and Water Sensors: Optional moisture sensors or switch closure inputs
Internal Fuse: 10A Slow-Blow
Charger: 18VDC Regulated Switching Supply, 330mA 6 Watt, 2.1mm Connector
Size of unit: 22x18x10 inch (56x45.7x25.4 cm) (HxWxD)
Weight: 26 lb (11.7 kg) (Shipping Weight 28 lb (12.7 kg))
Certificates: CE Compliance
|
|
|
Composite/Discrete Water Samplers Options & Prices
|
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
|
WS705 Improved Composite/Discrete Water Sampler (PN# CU1000)
Includes the following parts: a rugged, rainproof, lockable carrying enclosure, two gallon polyethylene sample bottle for
composite sample, one peristaltic sampling pump, a control panel enclosed logic timer/controller, one 15 ft reinforced PVC sample
pickup hose with removable debris strainer, a 12 V 5 AH rechargeable gel cell battery, and
BC100 Smart Charger.
|
$1,726 |
|
|
| COMPOSITE/DISCRETE WATER SAMPLERS ACCESSORIES |
|
| COMPOSITE/DISCRETE WATER SAMPLERS REPLACEMENT PARTS |
12V 5AH Rechargable Battery (PN# 00-010)
Battery Charger (120VAC to 12VDC Universal) (PN# 01-998)
¼" Pickup Hose (PN# 00-546)
Quick-Disconnect Fitting Plug & Cap (PN# CA0850)
Tubing Quick-Disconnect Fitting (PN# CA0860)
20-Mesh Pickup Strainer Assembly (PN# CA0600)
Replacement 20-Mesh Pickup Strainer Head (PN# 01-881)
Optional 6-Mesh Pickup Strainer Head (PN# 01-945)
Peristaltic Pump Tubing (PN# 00-744)
Rain Sensor (PN# CA0400)
Flow Sensor (PN# CA0500)
Float Switch for Plastic Bottle (PN# CA0200)
Float Switch for Glass Bottle (PN# CA0250)
2 Gallon Plastic Bottle (PN# 00-419)
1 Gallon Glass Bottle (PN# 00-835)
RG333 Auto-Drain Rain Gauge
|
$38
$64
$2.30/ft
$12
$8
$61
$8
$37
$7/ft
$56
$56
$44
$44
$14.80
$24
$201
|
WS700 Composite/Discrete Water Sampler
Single pump composite or discrete water sampler.
|
$1,362 |
|
WS750 Stormwater/Wastewater Sampler
Dual pump stormwater or wastewater sampler.
|
$1,537 |
|
WS755 Improved Stormwater/Wastewater Sampler
Includes the following parts: a rugged, rainproof, lockable carrying enclosure, two 1 gallon polyethylene sample bottles, two
peristaltic sampling pumps, a control panel enclosed logic timer/controller, two 15' reinforced PVC sample pickup hoses with
removable debris strainers, a 5 AH rechargeable gel cell battery, and BC100 Smart Charger.
|
$2,152 |
|
|
WS700-10G 10 Gallon Composite Sampler (CC0800)
|
$1,586 |
|
|
WS700R Refrigerated Composite Sampler
|
$1,521 |
|
WS700-PCO Portable Cooler Composite Sampler (PN# CM0500)
Mobile sampler with attached cooling unit.
|
$1,735 |
 |
WS700-IBO Ice Bag Composite Sampler (PN# CL0500)
Portable composite sampler with internal ice bag. One gallon sample bottle included.
|
$1,362 |
 |
RG750/RG755 4-20mA to Pulse Converter Module (PN# ELC000/ELD000)
This module is for use with flow monitors that produce a 4-20mA output. There are two versions available, one that pulses
every 15 minutes at 20mA (RG750) and one that pulses every 30 minutes at 20mA (RG755). Please specify the unit conversion that
best suits your application at the time of order.
|
$591 |
|
OxiTop® BOD Measurement Instrumentation
BOD measuring instrument for self-check with 6 measuring units, universal power supply, 50/60 Hz power plug, and accessories.
|
$Call |
|
|
Long Handled Dipper
|
$Varies |
|
|
Swing Sampler w/Pole & Bottle
|
$131 |
|
|
Sludge Judge, 15 FT
|
$91 |
|
GL500-7-2 Multichannel Data Logger
Features 7 analog channels and 2 pulse channels, USB and serial communication port,
and includes software and cables. Requires an external 12 VDC power source.
|
$742 |
|
GL500-2-1 Datalogger
Specify Serial or USB version when ordering. Features 2 analog channels and 1 pulse channel. Includes two internal 9V
batteries, Windows-based Global Water Datalogger Software, and PDA software for the CE operating system.
|
$369 |
|
|
WQ900 Water Pollution Testing Kit
|
$623 |
|
FSS Flow Sampling System
A unique combination of instruments that makes monitoring, sampling, and recording stormwater or industrial discharge water flows
easy.
|
$Varies |
|
WQS Water Quality Sampling System
A unique combination of instruments that allows for monitoring, sampling, and recording of water flows that exceed a water quality
parameter such as turbidity, pH, conductivity, ect.
|
$Varies |
 |
SIT65 Satellite Internet Telemetry
Replace the datalogger on your composite sampler with a telemetry system that pages you or alerts you via text messaging that your
sampler took a sample.
|
$2,249 |
 |
|
SP100 Water Sampler
|
$545 |
|
|
SP200 Peristaltic Sampling Pump
|
$742 |
|
SP250 Quick Release Water Sampler
Includes ¼ inch tubing, 15 ft long pick up tube and strainer, and 10 ft battery cable.
|
$1,187 |
|
|
|
