|
|
| WL430 SEWAGE LIFT STATION WASTEWATER LEVEL SENSOR |
|
Submersible waste water level sensor
|
|
FEATURES:
- UL listed
- Flush clog-free sensor; 316L SST
- Enhanced internal surge and lightning protection
- 2.5 inch sensing diaphragm
- Vented cable for automatic barometric compensation
- Double-sealed submersible cable exit
- Corrosion resistant
|
|
|
Wastewater Level Sensor Product Description
|
|
Global Water's Sewage Lift Station Wastewater Level Sensor (WL430) is based on over 30 years of design and field service heritage.
The Sewage Lift Station Wastewater Level Sensor's "Steelcage" design offers the highest reliability in level measurement for severe
high solids environments such as sewage, lift stations, storm canals, wet wells and slurry tanks. The waste water level
transmitter system consists of a submersible pressure sensing element cased in a 316L SST housing. The lift station wastewater
level sensor's electronics are capable of withstanding lightning strikes and meet RCTA/DO 160D for lightning direct effects and surge
protection for FAA and MIL-STD test and NASA standard electrical surge requirements. All Sewage Lift Station Wastewater Level
Sensors are corrosion resistant and clog free.
The WL430 Sewage Lift Station Wastewater Level Sensor is supplied with 40 ft. of standard polyurethane shielded and vented cable. The
lift station waste water level transmitter's unique cable venting system allows for barometric pressure differential compensation while
keeping the elements out, using a Gortex filter encapsulated tip. The "Steelcage" design gives full protection and allows sensing
to sewage levels no matter how much debris/mud/sand or rags build up.
|
|
|
Wastewater Level Sensor Specifications
|
WL430 Wastewater Level Sensor Electrical
Supply Voltage: 8 - 38 Vdc
Output: 4-20 mA
Zero Balance: ± 1% Full Scale Output (FSO)
FSO Setting: ± 1% FSO
Resolution: Infinite ( ±0.001% FSO usable)
Response Time: < 5 mS
Insulation Resistance: 1000 MO @ 50 Vdc
Reverse Polarity: Protected
Warm-Up: < 10 mS
Power Supply Effect: = ± 0.002% FSO per V input
EMI/RFI: Internal Filtering
Lightning Protected: MOV and dual gas discharge tube
Short Circuit Protected: Up to 40 Vdc
Wastewater Level Sensor Performance
Static Accuracy: ± 0.5% FSO ( BFSL, RSS)
(combined effects of non-linearity, hysteresis & repeatability)
Repeatability: ± 0.1% FSO
Temperature Effects: ± 1.5% FSO over comp range
(combined effects of Zero & FSO with reference at 70°F)
Long Term Stability: ± 0.25% FSO per year
Wastewater Level Sensor Mechanical
Pressure Ranges: 10psi (23 ft) or 15psi (34 ft)
Proof Pressure: 2x Full Scale
Burst pressure: 5x Full Scale
Materials: 316L SST plus cable
Pressure Port: Flush mount per outline
Electrical Connector: 1/2 inch-NPT Male submersible conduit fitting with 40ft of polyurethane cable
Dimensions: 3 inch diameter x 6 inch long (7.6 cm dia. x 15 cm long)
Weight: Nominal 20 oz (.57 kg)
Compensated Temp Range: 20 to 170°F (-6 to 76°C)
Operating Temp Range: 0 to 200°F (-17 to 93°C)
Storage temp range: -20 to 250°F (-28 to 121°C)
|
|
Wastewater Level Sensor Options & Prices
|
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
|
WL430-023 Sewage Lift Station Wastewater Level Sensor (PN# AP0100)
Pressure range: 10psi (23 ft), includes 40 ft of cable
|
$1,177 |
|
WL430-034 Sewage Lift Station Wastewater Level Sensor (PN# AP0200)
Pressure range: 15psi (34 ft), includes 40 ft of cable
|
$1,177 |
|
Extra Cable for WL430 sensors
Standard Sewage Lift Station Wastewater Level Sensors include 40 ft of cable, but can be purchased with up to 500 ft of
cable. Please add two weeks for shipping with this option.
|
$6.80/ft |
|
WL430-SRG Sewage Lift Station Wastewater Level Sensor Surge Protector (PN# AP0300)
Surge protector provides extra surge and lightning protection for the sewage lift station wasewater level
sensor. Requires 24VDC power.
|
$250 |
 |
|
|
