Groundwater Purging Pumps Product Description
Global Water's groundwater purging pumps provide an easy-to-use,
high-quality, economical solution for purging, and groundwater testing to a depth of 60ft (18m). The submersible
groundwater testing purging pump's 1 5/8” (40mm) diameter minimizes well hang ups and is ideal for use in 2” or larger
monitoring wells. Each purging pump is self priming when fully submersed and can be connected directly to a DC
power source to begin pumping. All groundwater testing pumps are tough and powerful with plastic construction
and a stainless steel impeller. The groundwater purging pumps can pump up to 3 US gallons (11.4 ltrs) per
minute. These groundwater testing purging pumps have been used and trusted within the groundwater industry
for more than 15 years and are recommended by drillers, hydrologists and field technicians around the world.
The Submersible Groundwater Purging Pumps have an inlet strainer and any sand, rocks or debris that pass through the
groundwater testing purging pump’s inlet strainer will pass through the purging pump without clogging it. The ground
water purging pumps can be run continuously for 48 hours even in dry conditions without motor damage. The
groundwater testing purging pump’s life expectancy is approximately 400 hours, lab tests have shown that the groundwater
purging pumps can last up to 750 hours. The submersible ground water testing pumps can achieve low flow sampling
by restricting the outlet flow from the end of the sampling tube with a valve (or even by clamping the hose). Restricting
the submersible groundwater testing pump’s outlet flow will increase the effective head the groundwater purging pump has to
deliver thus reducing output flow. Being a centrifugal ground water testing pump this action will also reduce the current
thus making the ground water testing pump use less energy increasing battery life.
Groundwater Purging Pumps Specifications
Description/Model Number:
Mini Purger
WP4012
Super Purger
WP6012
Voltage:
12V DC
Maximum Current Draw:
5 amps
10 amps
Dimensions:
160mm (6.3") X 40mm (1.58")
345mm (13.6") x 40mm (1.58")
Outlet Diameter:
11mm (3/8") and 13mm (1/2") adapter supplied
Operating Temperature:
Maximum 140°F (66°C)
Material of Casing:
ABS / Polycarbonate
Material of Pump Impeller:
Stainless steel
Material of Seal:
Nitrile
Recommended Pumping Duration:
Intermittent use. Running periods should
be restricted to 15 minutes followed by a 5 minute cool-down period
Model
Current
Draw
Output Performance (in gallons per minute) at Head (in ft)
0
5
10
15
20
25
30
35
40
45
50
55
60
WP4012 Mini Purger
50ft of cable attached
3.5-5.2 Amp
2.5
2.2
1.8
1.4
1.0
0.6
0.3
WP6012 Super Purger
70ft of cable attached
5.5-8.4 Amp
3.0
2.8
2.5
2.3
2.1
1.9
1.7
1.5
1.3
1.1
0.8
0.6
0.3
Note. Tests carried out with ½” ID tubing
Groundwater Purging Pumps Options & Prices
WP4012 Mini Purger groundwater purging pump
12 Volt, includes 50' of cable and battery clips
$92
WP6012 Super Purger groundwater purging pump
12 Volt, includes 70' of cable and battery clips
$183
RELATED PRODUCTS
GP Submersible Groundwater Pumps
Submersible groundwater pumps are ideal for groundwater testing in wells.
$Varies
GP Inline Water Pumps
Inline Water Pumps increase the maximum depth the submersible groundwater pumps can pump.