|
|
COND 1970i WATERPROOF CONDUCTIVITY METERS
Waterproof conductivity and TDS meter for field measurements.
|
FEATURES:
- Nearly indestructible, water proof housing
- Large, easy to read display
- Long lasting rechargeable NiMH batteries
- Conforms to all GLP requirements
- Measurements up to 300 feet deep with submersible cell
|
Waterproof Conductivity Meters Product Description
The Cond 1970i Waterproof Conductivity Meters enable you to carry out conductivity measurements rapidly and
reliably. The waterproof conductivity meter provides the maximum degree of operating comfort, reliability and measuring certainty for all applications. The
waterproof conductivity meters combine everything you want for water, wastewater, and environmental monitoring. Like all the 1970 series water quality meters
the Cond 1970i waterproof conductivity meters are nearly indestructible with both hose down proof (IP 66) and submersible (IP 67) ratings. But the Cond 1970i
waterproof conductivity meters are also very accurate, capable and easy to use. The proven procedures to determine or set up the conductivity cell constant
and special AutoRead function of the waterproof conductivity meters enable precision measurements that support your work. Along with an 800 data point datalogger,
a real time clock and recorder output, the Cond 1970i waterproof conductivity meters conform to all GLP requirements. With its large, easy to read display,
carrying/support handle and carrying strap the waterproof conductivity meters go with you wherever you need to do conductivity measurements - even on your bench top.
A conductivity probe is not included with the waterproof conductivity meters. The waterproof conductivity meter's 8 pin waterproof connector provides for quick
connection of one of the conductivity electrodes listed below. Global Water offers several other conductivity electrodes that are compatible with the waterproof
conductivity meter. Please call us if you need a special purpose conductivity electrode for your waterproof conductivity meter. NOTE: Always calibrate your
waterproof conductivity meter when you add a new conductivity electrode. Also, if you are using automatic temperature compensation the waterproof conductivity meter
will automatically detect the type of temperature being used. If you don't have a temperature sensor attached to the waterproof conductivity meter or the conductivity
electrode does not have an integrated temperature sensor you can manually set the temperature value. The waterproof conductivity meter compensates for temperature
based on a preset reference temperature of 68 °F or 77 °F (20 °C or 25 °C).
The Cond 1970i Waterproof Conductivity Meters ship complete with NiCad rechargeable battery, dual-voltage 110/220 VAC adapter, and neck strap. The waterproof
conductivity meter has an energy saving feature to avoid unnecessary battery depletion. The energy saving feature switches the waterproof conductivity meter off if
no key has been pressed for an hour.
TA 197 LF deep water conductivity cell
The Cond 1970i waterproof conductivity meters are great for measurements in bore holes (down to 2" diameter), wells and deep bodies of water with the ability to take
measurements down to 330 ft (100 m) in combination with the TA 197 LF depth armature. The TA 197 LF waterproof conductivity cell includes a built-in
temperature sensor, up to 330 feet (100 m) cable with waterproof plug (IP 67), pressure-resistant steel armoring with screw-off protective hood, and is
pressure-resistant to 145 psi (10 bar).
TetraCon® 325 Conductivity Probe
The TetraCon® 4-electrode system sets a new standard for professional conductivity measurements. In comparison with conventional measuring cells with 2 electrodes,
the TetraCon® 325 conductivity cell offers numerous technical advantages for your waterproof conductivity meters:
- Highly accurate and linear because of optimized cell geometry
- Extremely large measuring range with just one cell
- Long-term cell constant stability with high-quality abrasion-resistant graphite electrodes
- Built-in temperature sensor as standard
- Smallest immersion depth possible
- Automatic resistance compensation provides accurate measurements even with a dirty electrode
- Measurement not affected by cable influences, polarization effects or contact with side walls
- Robust, unbreakable epoxy body
Conductivity meter measurements
Conductivity is a parameter used to measure the ionic concentration and activity of a solution. The more salt, acid or alkali in a solution, the greater
its conductivity. The waterproof conductivity meter measures conductivity in units of S/m or, often, S/cm. The scale for aqueous solutions begins with
pure water at a conductivity of 0.05 uS/cm (77 °F /25°C). Naturally occurring waters such as drinking water or surface water have a conductivity in the range
100 – 1000 uS/cm. At the upper end of the chart some acids and alcalines can be found.
Conductivity measurements are used for a wide variety of applications including the production of ultrapure water and determining the salinity of sea water.
Conductivity is measured by using the waterproof conductivity meter and conductivity probe to make a measurement of the electrical resistance. The simplest
kind of measuring cell used consists of two similar electrodes. An alternating voltage applied to one of the electrodes causes the ions in the solution to migrate
towards the other electrodes. The more ions in the solution, the greater the current which flows between the electrodes. The waterproof conductivity meters
measure the current and uses Ohm's law to calculate first the conductance of the solution and then – by taken the cell data into account – the conductivity.
Waterproof conductivity meter applications
The ProfiLine Cond 1970i waterproof conductivity meters will work well in ground water, surface water, laboratory, food industry (juice), swimming pools, pharmaceutics,
paint/varnish (soluble), or electorplating measurement applications.
Waterproof Conductivity Meters Specifications
ProfiLine Cond 1970i
Range/Resolution:
Conductivity: 0.0 uS/cm to 500 mS/cm in 5 measuring ranges or autorange, 0.00 uS/cm to 19.99 uS/cm (for K=0.1 cm-1),
0.000 uS/cm to 1.999 uS/cm (for K=0.01 cm-1)
Temp: 23 to 221 °F (-5.0 to +105.0 °C)
Salinity: 0.0 to 70.0
TDS: 0 to1999 mg/l
Accuracy:
Conductivity: + 0.5% of value
Temperature: + 0.1 K
Reference temp: 68 to 77 °F (20 or 25 °C), selectable
Cell constant: Calibratable 0.450 to 0.500 and 0.800 to 1.200 cm-1, fixed: 0.01 cm-1 freely adjustable 0.25 to 2.5 cm-1 and 0.09 to 0.11 cm-1
Temperature comp: Automatic, can be switched off
Power: Rechargeable NiMH batteries (approx. 600 hours per full charge)
AC power: Wide-range power supply 100-240 VAC 50/60 Hz (included)
Dimensions (LxWxH): 3.54x7.87x7.48 in (90x200x190 mm)
Weight: 3.3 lb (1.5 kg) (without plug-in power supply)
Ingress protection: IP 67
Electrical safety: Protective class III
Ambient conditions
Operation: 14° to 131°F (-10° to 55°C)
Storage: 13° to 149°F (- 25° to 65°C)
Test certificates: cETLus, CE
TetraCon® 325 Probe
Electrode material: Graphite
Shaft material: Epoxy
Shaft length: 4.72 in (120 mm)
Cell constant: K = 0.475 cm-1
Diameter: 0.60 in (15.3 mm)
Cable length: 4.9 ft (1.5 m)
Measuring range: 1 uS/cm to 2 S/cm
Temperature range: 32 to 212 °F (0 to 100 °C)
Min/max immersion depth: 1.4/4.7 in (36/120mm)
TA 197 LF Submersible Conductivity Probe
Range: 10 uS/cm to 2 S/cm
Cell constant: 0.475 cm-1 ± 1.5 %
Temperature measurement
Thermistor: Integrated NTC (30 kW / 25°C)
Temp range: -5 to +60°C
Temp accuracy: ± 0.2 K
Electrodes: 4, graphite
Body materials: Stainless steel (1.4571) & epoxy
Dimensions: 38 mm dia. x 246 mm L (overall)
Cable lengths: 25 m, 40 m, 60 m, 100 m (cable is exchangeable by WTW-Service)
Immersion depth: Min. (80 mm), Max. 330 FT (100 m)
Pressure resistance: 145 psi (10 bar) max.
Weight: (1,113 g) sensor & hood w/o cable
Storage medium: Air
Waterproof Conductivity Meters Options & Prices
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
ORDER NOW
3C30-010 Cond 1970i Waterproof Conductivity Meter (PN# 3C30-010)
Conductivity meter with universal AC power supply. Probe not included.
|
$Call |
|
|
Waterproof Conductivity Meter Electrodes
|
TetraCon® 325 Waterproof Conductivity Meter Probe (PN# 301960)
Includes 5 ft (1.5m) cable.
|
$Call |
|
TA 197 LF-25 Waterproof Conductivity Meter Probe (PN# 301980)
Deep water conductivity cell w/82 ft (25 m) cable.
|
$Call |
|
TA 197 LF-40 Waterproof Conductivity Meter Probe (PN# 301981)
Deep water conductivity cell w/131 ft (40 m) cable.
|
$Call |
|
TA 197 LF-60 Waterproof Conductivity Meter Probe (PN# 301982)
Deep water conductivity cell w/197 ft (60 m) cable.
|
$Call |
|
TA 197 LF-100 Waterproof Conductivity Meter Probe (PN# 301983)
Deep water conductivity cell w/328 ft (100 m) cable.
|
$Call |
|
|
Waterproof Conductivity Meter Calibration Solutions
|
KS 5 uS Waterproof Conductivity Meter 5 uS/cm Solution (PN# 300580)
Calibration standard 5 µS/cm, shelf life 1 year, NIST traceable, accuracy ±2%.
|
$Call |
|
KS 100 uS Waterproof Conductivity Meter 100 uS/cm Solution (PN# 300578)
Calibration standard 100 µS/cm, shelf life 2 years, NIST traceable, accuracy ±3%.
|
$Call |
|
E-SET Trace uS Waterproof Conductivity Meter Calibration Set (PN# 300572)
Calibration set, 6 bottles with 50 ml calibration and control standard each, KCl 0.01 M/l traceable to PTB/NIST.
|
$Call |
|
6R/SET/LAB1 Waterproof Conductivity Meter Calibration Set (PN# 302870)
Test set for checking all conductivity meters with waterproof 8-pin socket according to ISO 9000.
|
$Call |
|
|
RELATED PRODUCTS
|
EC400 Pocket Conductivity Meter
Includes meter and conductivity cell, protective sensor cap, sample cup with cap, four SR44W button batteries, and
48"(1.2m) neckstrap.
|
$98 |
|
EC410 Pocket Conductivity Meter Kit
Includes an EC400 conductivity tester with sensor, protective sensor cap, 84uS, 1413uS, and 12880uS standards
(30mL bottle each), weighted base, 3 sample cups with cap, four 1.5V button batteries, and 48"(1.2m) neckstrap,
and carrying case.
|
$141 |
|
EC500 Pocket pH/Conductivity Tester
Includes electrode, protective sensor cap, sample cup with cap, four 1.5V SR44W batteries, and a 48" (1.2m)
neckstrap.
|
$141 |
|
EC510 Pocket pH/Conductivity Tester Kit
Includes an EC500 portable conductivity meter with sensor, 84uS, 1413uS, 12880uS calibration standards, pH
buffer pouches (1 each of 4, 7, 10pH plus rinse solution), weighted base, protective sensor cap, 3 sample cups, four
1.5V SR44W batteries, carrying case, and a 48" (1.2m) neckstrap
|
$184 |
|
|
2X00-001A Vario Cond Temperature Conductivity Meter TetraCon® V Kit
Includes: Vario Cond, mobile case, TetraCon® V cell, and KCl solution.
|
$Call |
|
2CA102 Cond 3110 Set Handheld Conductivity Meter Set
Includes meter, TetraCon 325-3 probe, case & accessories.
|
$Call |
|
|
WQ301 Conductivity Sensor
|
$679 |
|
|
WQ Water Quality Sensors
|
$Varies |
|
|
|
|
