|
|
| A-100NE CHEMICAL PUMPS |
|
Digital peristaltic pumps for water and wastewater treatment.
|
|
FEATURES:
- Peristaltic pump design has no valves to clog
- Self priming even against maximum line pressure
- Programmable repeating interval on-time cycle timer
- Digital interval timer for high frequency of small injections per minute
|
|
|
Chemical Pumps Product Description
|
|
The A-100NE Chemical Pumps are loaded with features that make them the ideal choice for a variety of water, wastewater and
industrial chemical metering applications. The A-100NE's low maintenance chemical pump design is naturally clog
resistant and self priming - even against the maximum rated line pressure. The chemical pumps have a de-gassing
design which eliminates gas or air accumulation and also prevents vapor lock or losing it's priming, so no bypass system is
required. Higher viscosity liquids up to 5,000 cps are easily handled by the chemical pumps, as are liquids with up
to 50% solids content.
The user friendly touch pad and bright LCD display make the A-100NE Chemical Pumps easy to operate with service and alarm
indicator icons, motor speed or input signal values, and a prime mode for quick priming without program changes. The Chemical
Metering Pumps have four operating modes including manual on time per cycle adjustment, pulse input batching, 4-20mA on time per
cycle adjustment, and 0-10VDC on time per cycle adjustment. The repeating interval on time cycle timer is programmable in
seconds, minutes, hours, and days, resulting in a near infinite turndown ratio for the chemical pumps. The 4-20mA on
time per cycle adjustment mode allows the chemical pumps to have their timing cycle adjusted via a 4-20mA input
signal. The chemical pump's digital interval timer allows you to set up a high frequency of small injections per
minute.
These pumps include an exclusive Tube Failure Detection system (TFD), which senses chemical in the chemical pump head, shuts
off the peristaltic pump and activates an alarm relay (dry contact closure). The chemical pump's TFD system is able
to detect a wide range of chemicals (ie. chlorine, acids, soaps, etc.). This exclusive technology was designed to disregard
chemical pump compatible fluids; such as water and lubricants. If there is a rupture in the chemical pump's
tube, and a chemical is detected in pump head, the peristaltic pump will automatically shut off and energize a relay, permitting
communications with external equipment, such as an alarm or a SCADA system. The chemical pumps are also compatible
with the output flow verification sensor system which can shut down the pump and alert you if
chemical stops flowing for any reason.
Built to last, the A-100NE chemical pumps are housed in a weatherproof NEMA 3R housing and have a continuous-duty motor with
advanced cooling to ensure a long service life.
All pumps ship with 2 chemical pump tubes, 10 ft (3 m) ( of suction and discharge tubing, suction strainer/foot valve with
ceramic weight and an injection/check valve assembly.
|
|
|
Chemical Pump Applications
|
The chemical pumps have many applications including:
- Water treatment and conditioning
- Proportional chemical injection
- Wastewater treatment
- Biocide feed
- Rural water systems
- Cooling tower and boiler treatment
- Fertilizer and nutrient injection
- Pool chlorination and pH control
|
|
|
Chemical Pumps Specifications
|
Chemical Pumps Specifications
Max. working pressure: 100 psig (6.9 bar)
Max. fluid temperature: 130° F (54° C)
Max. ambient temperature: 14 to 110° F (-10 to 43° C)
Output adjustment range: Adjustable 0.1 to 99 seconds
Duty cycle: Continuous
Maximum viscosity: 5,000 Centipoise
Maximum suction lift: 30 ft. Water 0 psig
Maximum Solids: 50% by volume
Enclosure: NEMA type 3R, (IP23)
Dimensions: 6-1/8 x 10-1/8 x 9 inch (15.6 x 25.7 x 22.9cm)
Approximate shipping wt: 10 lb. (4.5 kg)
Chemical Pumps Materials of Construction
Non-wetted compontents
Pump Head & Enclosure: Valox (PBT) thermoplastic
Pump Head Cover: Clear PVC
Cover Screws: 300 SS w/polypropylene cap
Roller Assembly
Rotor: Valox (PBT)
Rollers: Nylon
Roller Bearings: Bronze
Motor Shaft: Nickel plated steel
TFD System Sensor pins: Hastelloy C-276
Chemical Pumps Wetted Components
Pump Tube Assembly: Norprene
Tube connection fittings: PVDF
Suction Tubing: Clear PVC
Suction Strainer: Natural Polypropylene
Discharge Tubing: Natural Polyethylene (LLDPE)
Injection/Check valve assembly
Body & insert: Polypropylene
Check Ball: Ceramic
Spring: Hastelloy C-276
Ball Seat O-ring: TFE/P
Static Seal O-ring: Viton
Duckbill Valve: Santoprene
|
|
|
Chemical Pumps Options & Prices
|
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
|
|
| 115 VAC/60Hz A-100NE CHEMICAL PUMPS |
A1N10E-4T Chemical Pump (PN# JAA004)
Max GPD: 4.9 (Maximum liquid output at zero backpressure), Max PSI: 100 (Maximum pressure output), Tube OD: 1/4 inch,
Max Motor RPM: 30 RPM, Max Amp: 1.37 A
|
$600 |
|
A1N20E-4T Chemical Pump (PN# JAA008)
Max GPD: 8.0 (Maximum liquid output at zero backpressure), Max PSI: 100 (Maximum pressure output), Tube OD: 1/4 inch,
Max Motor RPM: 45 RPM, Max Amp: 1.87 A
|
$600 |
|
A1N10E-6T Chemical Pump (PN# JAA016)
Max GPD: 16.0 (Maximum liquid output at zero backpressure), Max PSI: 100 (Maximum pressure output), Tube OD: 3/8 inch,
Max Motor RPM: 30 RPM, Max Amp: 1.37 A
|
$600 |
|
A1N20E-6T Chemical Pump (PN# JAA024)
Max GPD: 24.0 (Maximum liquid output at zero backpressure), Max PSI: 100 (Maximum pressure output), Tube OD: 3/8 inch,
Max Motor RPM: 45 RPM, Max Amp: 1.87 A
|
$600 |
|
A1N10E-7T Chemical Pump (PN# JAA052)
Max GPD: 52.5 (Maximum liquid output at zero backpressure), Max PSI: 50 (Maximum pressure output), Tube OD: 7/16 inch,
Max Motor RPM: 30 RPM, Max Amp: 1.37 A
|
$600 |
|
A1N30E-7T Chemical Pump (PN# JAA095)
Max GPD: 95.1 (Maximum liquid output at zero backpressure), Max PSI: 50 (Maximum pressure output), Tube OD: 7/16 inch,
Max Motor RPM: 60 RPM, Max Amp: 1.87 A
|
$600 |
|
|
| 220 VAC/50Hz A-100NE CHEMICAL PUMPS |
A1N11E-4T Chemical Pump (PN# JAB013)
Max mL/Min: 13 (Maximum liquid output at zero backpressure), Max Bar: 6.9 (Maximum pressure output), Tube OD: 0.635 cm,
Max Motor RPM: 30 RPM, Max Amp: 0.68 A
|
$600 |
|
A1N21E-4T Chemical Pump (PN# JAB021)
Max mL/Min: 21 (Maximum liquid output at zero backpressure), Max Bar: 6.9 (Maximum pressure output), Tube OD: 0.635 cm,
Max Motor RPM: 45 RPM, Max Amp: 1.14 A
|
$600 |
|
A1N11E-6T Chemical Pump (PN# JAB042)
Max mL/Min: 42 (Maximum liquid output at zero backpressure), Max Bar: 6.9 (Maximum pressure output), Tube OD: 0.953 cm,
Max Motor RPM: 30 RPM, Max Amp: 0.68 A
|
$600 |
|
A1N21E-6T Chemical Pump (PN# JAB063)
Max mL/Min: 63 (Maximum liquid output at zero backpressure), Max Bar: 6.9 (Maximum pressure output), Tube OD: 0.953 cm,
Max Motor RPM: 45 RPM, Max Amp: 1.14 A
|
$600 |
|
A1N11E-7T Chemical Pump (PN# JAB138)
Max mL/Min: 138 (Maximum liquid output at zero backpressure), Max Bar: 3.45 (Maximum pressure output), Tube OD: 1.11 cm,
Max Motor RPM: 30 RPM, Max Amp: 0.68 A
|
$600 |
|
A1N31E-7T Chemical Pump (PN# JAB250)
Max mL/Min: 250 (Maximum liquid output at zero backpressure), Max Bar: 3.45 (Maximum pressure output), Tube OD: 1.11 cm,
Max Motor RPM: 60 RPM, Max Amp: 1.14 A
|
$600 |
|
|
| REPLACEMENT CHEMICAL PUMP TUBES |
A-002N-4T Chemical Pump Tube (PN# JA1000)
1/4 inch digital peristaltic pump tube for -4T suffix pumps.
|
$30 |
|
A-002N-6T Chemical Pump Tube (PN# JA1001)
3/8 inch digital peristaltic pump tube for -6T suffix pumps.
|
$30 |
|
A-002N-7T Chemical Pump Tube (PN# JA1002)
7/16 inch digital peristaltic pump tube for -7T suffix pumps.
|
$35 |
|
|
| REPLACEMENT CHEMICAL PUMP PARTS |
|
A-014N-6A Injection/check valve assembly (PN# JA1010)
|
$38 |
|
|
C-340A Strainer/foot valve assembly (PN# JA1009)
|
$30 |
|
|
|
