|
|
TX80 TURBINE INSERTION FLOW METERS
Fixed depth insertion turbine flowmeters
|
FEATURES:
- High-quality ruby bearings for excellent low-flow performance and long life
- One easily-replaced moving part
- Pickup exerts no magnetic drag on the rotor
- Square-wave frequency output can connect directly to PLC's or counter controls
- Indicator or transmitter can be mounted on the flowmeter or remote
- Fittings are available in a wide variety of materials and sizes
|
To Order Call 1-800-876-1172
|
|
Turbine Insertion Flow Meter Product Description
The TX80 Series, Turbine Insertion Flow Meters, are turbine-type insertion flow meters
designed for use in pipe sizes 1-1/2" to 8". High-quality jewel bearings and nickel-bound tungsten carbide shaft are used
for maximum life and extreme low friction. Turbine Insertion Flow Meter bodies are machined from solid rod for maximum
precision. Lowflow performance is superior for Insertion Turbine Flowmeters. The rotation of the rotor is detected
by a non-drag Hall-effect sensor. The Insertion Turbine Flowmeter's output is a pulse-type square wave, which can be sent
long distances (up to 2,000 feet) without a transmitter. This signal can be connected directly to PLC's, counters, and computer
cards.
TX80 Turbine Insertion Flow Meters are ideal for chemical proportioning applications. For rate and total display, as well
as pump pacing, the FT415 or FT420 flow indicator can be mounted directly on the TX80 Series Insertion Turbine Flowmeter. For
a 4-20mA analog output only, the AO55, blind 4-20mA converter, can be mounted directly onto the meter.
The TX80 Series Turbine Insertion Flow Meters require special fittings, since they are not depth-adjustable, installation in the fitting
ensures correct depth placement in the pipe. Fittings are available in PVC, brass, and stainless steel. Insertion Turbine
Flowmeters are available in brass, 316 stainless steel, and polypropylene.
Turbine Insertion Flow Meter Specifications
Accuracy: +1% of full scale
Flow Range: 0.2 - 30 ft/sec (.06 - 9.14 m/sec)
Sensor/Output: Hall Effect Sensor - 12 VDC current sinking pulse
Maximum Pipe Pressure:
Polypro: 175 psi @ 75º F (12 bar)
Brass: 200 psi (14 bar)
316 SS: 250 psi (17 bar)
Maximum Temperature:
Polypro: 130º F (55º C) at 0 psi
Brass, SS: 200º F (93º C) at 0 psi
Nominal K-factor: 11 Hz/F/s (3.6Hz/M/s)
Power: 6 - 24 Vdc, 8 mA minimum
Materials:
Sensor Body: Polypro, Brass, 316 SS
Rotor: Polypro
Shaft: Nickel-bound tungsten carbide
Bearings: Ruby
Cable: #22 AWG 3-con 18' (6m)
Maximum Cable Run: 2,000' (650m)
Weight: ~2lbs (907g)
Dimensions: 1-1/2" dia. x 4" long(3.8 cm dia. x 10 cm long)
Turbine Insertion Flow Meter Options & Prices
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
ORDER NOW
TX81Y Fixed Depth Turbine Insertion Flow Meter (PN# BN0000)
Polypro Turbine Insertion Flow Meter, for 1-1/2" to 4" pipe diameter.
|
$447 |
|
TX81B Fixed Depth Turbine Insertion Flow Meter (PN# BN0050)
Brass Turbine Insertion Flow Meter, for 1-1/2" to 4" pipe diameter.
|
$566 |
|
TX81S Fixed Depth Turbine Insertion Flow Meter (PN# BN0100)
316 Stainless Steel Turbine Insertion Flow Meter, for 1-1/2" to 4" pipe diameter.
|
$660 |
|
TX82Y Fixed Depth Insertion Turbine Flowmeters (PN# BN0200)
Polypro Insertion Turbine Flowmeters, for 6" to 8" pipe diameter.
|
$488 |
|
TX82B Fixed Depth Insertion Turbine Flowmeters (PN# BN0250)
Brass Insertion Turbine Flowmeters, for 6" to 8" pipe diameter.
|
$581 |
|
TX82S Fixed Depth Insertion Turbine Flowmeters (PN# BN0300)
316 Stainless Steel Insertion Turbine Flowmeters, for 6" to 8" pipe diameter.
|
$696 |
|
|
Special Fittings (Required for Installation)
|
|
Fittings for TX81 Turbine Insertion Flow Meters:
|
|
TF81T-P-150 PVC Tee Fitting (Male stub ends), 1-1/2" Diameter (PN# BN0005)
|
$135 |
|
|
TF81T-P-200 PVC Tee Fitting (Male stub ends), 2" Diameter (PN# BN0010)
|
$142 |
|
MF82S-P-300-16 PVC Saddle Fitting, 3" Diameter (PN# BN0020)
Installed on 16" long pipe stub.
|
$240 |
|
|
MF82S-P-400 PVC Saddle Fitting, 4" Diameter (PN# BN0205)
|
$217 |
|
|
PVC saddles are supplied with Buna-N O-rings only. For
chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement.
|
|
|
TF81T-S-150 304 Stainless Steel Tee Fitting, 1-1/2" Diameter (PN# BN0105)
Female thread.
|
$375 |
|
TF81T-S-200 304 Stainless Steel Tee Fitting, 2" Diameter (PN# BN0110)
Female thread.
|
$375 |
|
|
MF82S-B-300 Bronze Saddle Fitting, 3" Diameter (PN# BN0115)
|
$288 |
|
|
MF82S-B-400 Bronze Saddle Fitting, 4" Diameter (PN# BN0305)
|
$331 |
|
|
MF82W-S-400 316 Stainless Steel Weld Fitting, 4" Diameter (PN# BN0320)
|
$217 |
|
|
|
Fittings for TX82 Insertion Turbine Flowmeters:
|
|
MF82S-P-600 PVC Saddle Fitting, 6" Diameter (PN# BN0210)
|
$275 |
|
|
MF82S-P-800 PVC Saddle Fitting, 8" Diameter (PN# BN0215)
|
$295 |
|
|
PVC saddles are supplied with Buna-N O-rings only. For
chemical service, the O-ring must be removed and the saddle glued on to the pipe with PVC cement.
|
|
|
|
MF82S-F-600 Ductile Iron Saddle Fitting, 6" Diameter (PN# BN0310)
|
$159 |
|
|
MF82S-F-800 Ductile Iron Saddle Fitting, 8" Diameter (PN# BN0315)
|
$188 |
|
|
MF82W-S-600 316 Stainless Steel Weld Fitting, 6" Diameter (PN# BN0325)
|
$217 |
|
|
MF82W-S-800 316 Stainless Steel Weld Fitting, 8" Diameter (PN# BN0330)
|
$217 |
|
|
Optional Output Displays/Converters
Meter mounted displays/converters include 18 feet of cable.
|
FT415M/F415W Battery Powered Pulse Output and Display (PN# BN0400/BN0410)
Includes 3V replaceable Lithium. Specify meter (PN# BN0400) or wall (PN# BN0410) mounted.
|
$504 |
 |
FT420M/FT420W Pulse & 4-20mA Output Display (PN# BM0200/BM0210)
Requires 12-24VDC power. Specify meter (PN# BM0200) or wall (PN# BM0210) mounted.
|
$494 |
|
AO55M/AO55W Blind 4-20ma Converter (PN# BM0250/BM0260)
Requires 24-36VDC power. Specify meter (PN# BM0250) or wall (PN# BM0260) mounted.
|
$389 |
 |
|
Related Products
|
EX80 Series Fixed Depth Insertion Magmeter
Stainless Steel or PVC, for 1" to 8" size.
|
$Varies |
 |
EX100/200 Series Adjustable Depth Electromagnetic Flow Sensor
Stainless Steel and Brass Insertion Electromagnetic Flow Sensor, for 3" to 48" pipe diameter.
|
$Varies |
|
TX100/200 Series Adjustable Turbine Insertion Flow Sensors
Stainless Steel and Brass Adjustable Turbine Insertion Flow Sensors, for 3" to 48" pipe diameter.
|
$Varies |
 |
SPX Inline Low Flow Meter
Chemical resistant low flow meters for small diameter pipes
|
$281 |
|
WMP101 Plastic Flanged Magnetic Flow Meter
The WMP101 flanged magnetic flow meters have no rotor to stop turning or bearings to wear out and are virtually maintenance-free,
especially in applications where debris or sand would foul most industrial mechanical flowmeters.
|
$629 |
|
WMX101 Magnetic Flow Meter
The WMX101-Series flanged magnetic flow meters have no rotor to stop turning or bearings to wear out and are virtually
maintenance-free, especially in applications where debris or sand would foul most industrial mechanical flowmeters.
|
$Varies |
|
FM500 Ultrasonic Flow Meter
Transit time/Doppler flowmeter with datalogger & 10 FT cable.
|
$2,940 |
|
GL500 Turbine Insertion Flow Recorder
Turbine insertion flow recorder for flow recording. Requires an external 12 VDC power source. With weather proof enclosure and 12V battery.
|
$846 |
|
|
|
|
