|
|
RM100 REMOTE RADIO TELEMETRY SYSTEM
Wireless communication system for multiple remote monitoring sites.
|
FEATURES:
- Retrieve data from remote monitoring sites
- Works with most Global Water serial loggers
- Easy to use Global Access software included
- Portable units for drive by data collection
|
Remote Radio Telemetry System Product Description
Global Waters new RM100 Remote Radio Telemetry System uses powerful radio transceivers to seamlessly connect
you with your remote monitoring sites. Now you can communicate with any number of remotely placed monitoring stations via a wireless communication system
from the comfort of your office or vehicle.
Radio Modems
The RM100 Remote Radio Telemetry System packages use rugged, industrial 2-way radio modems that are designed for seamless communications with Global Waters
serial dataloggers. The powerful 1-watt, 900mHz radios require no license and are capable of line-of-site wireless communications of up to 15 miles with the proper
antennas. Built-in error correction assures accurate data transfer between radio telemetry systems. Each remote radio telemetry system package has a
unique address, so you never have to worry about cross-talk or interference between one radio system and another.
Remote Radio Telemetry System Software
Global Waters great Global Access wireless communications software has an easy to use, intuitive interface. The built-in address book allows you to quickly set up
your radio telemetry system monitoring sites with a unique identifier and name, and you can add new sites at any time. The remote radio telemetry system software
allows you to get a current reading from any of your sensors, download the logged data, sample continuously and even reprogram your logger just as though you were at the
site.
Packaged Wireless Communication Systems
To make them even easier to use the RM100 Remote Radio Telemetry System packages are offered in four pre-configured, ready to deploy systems, and we included one
convenient starter kit. Everything you need is included to get your wireless communication system up and running quickly. One server (base) unit and one
client (remote) unit is required to make a complete radio telemetry system. Many remote radio telemetry systems can report back to a single base. We can
also help develop a custom radio telemetry system for you.
RM100-SFL
Server, Fixed Location: This is the best choice when you have an existing enclosure or the radio telemetry server system will be mounted in a dry location such as an
office. This radio telemetry system includes a server modem, RS232 serial cable, AC adaptor, 25 antenna cable, permanent mount 6dBi omni-directional antenna
with 2 pole mount hardware, manual and software. We also include a 3dBi rubber coated stubby antenna which is helpful in the testing and setup process.
RM100-SMP
Server, Mobile Platform: This is ideal short term monitoring projects or for doing drive by data collection. The rechargeable 2.2Ahr battery will operate this wireless
communication package for up to 12 hours on a single charge. The wireless communications package includes the server modem mounted inside a weatherproof
case with a 2.2Ahr battery and power switch, AC charger, RS232 serial cable, magnetic base 5dBi mobile omni-directional antenna with 4 cable, manual and CDROM.
RM100-CSR
Client, Short Range: This is the perfect choice for applications where your remote monitoring stations are under 10 miles line-of-sight. This radio telemetry system
package includes a weatherproof case with mounting hardware for 2 pole, client radio with 5Ahr battery, radio to logger serial cable, smart charger, 15 foot antenna cable,
9dBi Yagi antenna with 2 hardware, manual and CDROM. For long term monitoring we offer optional solar panels and hardware mounting kits.
RM100-CLR
Client, Long Range: For remote monitoring sites that are up to 15 miles line-of-sight or where you may have a few trees or other obstructions in shorter range sites, this radio
telemetry system package features a higher gain antenna for extra distance. The radio telemetry system package includes a weatherproof case with mounting hardware
for 2 pole, client radio with 5Ahr battery, radio to logger serial cable, smart charger, 15 foot antenna cable, 13dBi Yagi antenna with 2 hardware, manual and CDROM. For
long term monitoring we offer optional solar panels and hardware mounting kits.
RM100-CSK
Client/Server Starter Kit: This kit is ideal for those who have more experience in electronic instrumentation. We make it easy to install and configure the RM100
wireless communications system in just about any application where you want to interface with one of our Global Water serial loggers. Choose from the list of higher
gain antennas for ranges beyond what the included stubby antennas can handle. The RM100-CSK includes one server, one client, two 6 rubber coated stubby
antennas, RS232 serial cable, radio to logger serial cable, 2 AC adaptors, manual and CDROM.
Remote Radio Telemetry System Specifications
Instrument Type: Industrial RF Transceiver
Transceiver Performance:
Output Power: 1000mW
Transmission Range: Up to 15 miles (32 km) line-of-sight
Receiver Sensitivity: -100dBm typical @ 76.8kbps RF Data Rate
Networking:
Frequency Band, RF Technology: 902 928, FHSS (USA)
Supported Network Topologies: Point-to-Point, Point-to-Multipoint
Channels: 32
Electrical:
Power Consumption: 40mA receive, 400mA transmit (@ 12 Vdc)
Power Requirement: 7-18 VDC
Environmental:
Operating Conditions: Temp -40° to +80°C; 10% to 90% humidity (non-condensing)
Physical:
Dimensions: 4-3/4 x 2-3/4 x 1-1/8
Weight: 7 oz (170 g)
Antenna Connector: RPSMA Jack
Serial Connector: DB9
Serial Cord Length: 6 feet (183 cm)
*Transceivers are USA FCC compliant and do not necessarily comply with regulations in other countries.
Remote Radio Telemetry System Options & Prices
Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.
Terms and Conditions
RM100-SFL Server Package, Fixed Location
Includes a server modem, RS232 serial cable, AC adaptor, 25 antenna cable, permanent mount 6dBi omni-directional antenna
with 2 pole mount hardware, manual and software.
|
$667 |
|
RM100-SMP Server Package, Mobile
Includes the server modem mounted inside a weatherproof case with a 2.2Ahr battery and power switch, AC charger, RS232 serial
cable, magnetic base 5dBi mobile omni-directional antenna with 4 cable, manual and software.
|
$720 |
|
RM100-CSR Client Package, Short Range
Includes a weatherproof case with mounting hardware for 2 pole, client radio with 5Ahr battery, radio to logger serial cable, smart
charger, 15 foot antenna cable, 9dBi Yagi antenna with 2 hardware, manual and software. NOTE: Dataloggers connected to
this radio system require their own power source.
|
$1,045 |
|
RM100-CLR Client Package, Long Range
Includes a weatherproof case with mounting hardware for 2 pole, client radio with 5Ahr battery, 2.2Ahr battery to power a
datalogger, radio to logger serial cable, smart charger, 15 foot antenna cable, 13dBi Yagi antenna with 2 hardware, manual
and software. NOTE: Dataloggers connected to this radio system require their own power source.
|
$1,150 |
|
RM100-CSK Client/Server Kit
Includes one server, one client, two 6 rubber coated stubby antennas, RS232 serial cable, radio to logger serial cable, 2 AC
adaptors, manual and CDROM.
|
$835 |
|
|
ACCESSORIES
|
|
AN100-OD6 Omni-directional 6dBi Antenna
|
$135 |
|
|
AN100-OM5 Omni-directional 5dBi Mobile Antenna w/Magnetic Base
|
$65 |
|
|
AN100-YA9 Yagi Directional 9dBi Antenna
|
$105 |
|
|
AN100-YA13 Yagi Directional 13dBi Antenna
|
$135 |
|
|
RM100-SPMB Hardware, Solar Panel Mounting Kit
|
$52 |
|
FVF100 Antenna Lightning Suppressor
Protect your Remote Radio Telemetry System from lightning strikes.
|
$45
|
|
00-009 12V-2.2AH Battery
Suggested power source for GL500 dataloggers.
|
$25 |
|
SP101 Solar Panel (80mA)
Supplemental power for remote radio telemetry system sites. NOTE: Do not use solar panels as the only power source,
use with rechargable batteries.
|
$195
|
 |
SP102 Solar Panel (5 watts, 300mA minimum)
Supplemental power for remote radio telemetry system sites. NOTE: Do not use solar panels as the only power source,
use with rechargable batteries.
|
$325
|
 |
|
RELATED PRODUCTS
|
GL500-2-1 Datalogger
Features 2 analog channels and 1 pulse channel. Includes Windows-based Global Water Datalogger Software, and PDA software for the CE
and Mobile operating systems.
|
$310 |
|
GL500 Multichannel Data Logger
Includes Global Logger Software.
|
$625
|
|
WL16 Water Level Logger
Submersible pressure transducer and datalogger for recording water level data.
|
$835 |
|
WQMS Water Quality Monitoring System
The standard unit includes a datalogger, temperature sensor, pH sensor, conductivity sensor (with a 0-5000΅S range unless otherwise specified), and DO sensor.
|
$2,779
|
|
SIT65 Satellite Internet Telemetry
Retrieve sensor data from virtually anywhere.
|
$1,815 |
 |
|
|
|
