ORP Controllers,Oxygen Reduction Potential Controller

3671 ORP CONTROLLER
Monitor and control process water using ORP sensors

ORP controllers,Oxygen reduction potential controller

FEATURES:

Automatic temperature compensation 0-100° C
Set points on front panel
Large bright red LED screen
Easy to install

To Order Call 1-800-876-1172
ORP Controller Options & Prices

On this page:

• ORP Controllers Product Description
• ORP Controller Specifications
• ORP Controller Options & Prices

Downloads (PDF):

• ORP Controllers Brochure

Additional Information:

• Product Support

ORP Controller Product Description
Global Water’s ORP Controller is a 1/8 DIN panel mount controller with dual SPDT Hi/Lo relays, manual set points and calibration potentiometers set into the front of the panel. The ORP controllers feature a voltage/recorder output and an internal ORP select switch. The ORP Controller's display is a large 0.56” high efficiency bright red LED. The ORP Controller's sensor connectors are a BNC input and spade lug screw type connector block. The ORP Controller requires a Pt-100 ATC probe or a simulation resistor for temperature.

The ORP controllers use an all solid state design to achieve low power consumption and reduced internal heating. Each ORP controller is heat cycled 100 hours before shipment. The ORP controller offers automatic pH temperature compensation from 0 to 100°C and set points that cover the entire ORP sensor span.

ORP Controller Specifications

ORP Controller Range:
  pH: 0 to 14.0
  Temp: 0 to 100 °C
  mV: -1990 to +1990
Resolution:
  pH: 0.1
  Temp: 1 °C
  mV: 10
Accuracy:
  pH (+ digit): 0.1 (relative) when standardized within 2 pH
  Temp (+ digit): 1
  mV (+ digit): +0.1 %

Input Impedance: >1012 ohms
Temperature Compensation: Auto 0.0 to 100.0 °C
Recorder Output (Full Range):
  pH: 1400 mV
  Temp: 1000 mV
  mV: + 1990mV

Dual point ON/OFF control: pH or ORP with internal select switch
Dead Band: + 0.1 pH for each set point
Relay Output: 8 Amp at 115 VAC, 4 Amp at 230 VAC
Readout: 0 .56” high efficiency red LED display
Power Source: 115 VAC, 230 VAC + 15% 50/60 Hz
Dimension: 3.75"x2"x6.75" (96x48x172mm)
Weight: 1.5 lbs (0.69 kg)

ORP Controller Options & Prices Prices listed are for United States and Canada only. Call or e-mail us for pricing in other countries.

3671 KB ORP Controller Kit Kit includes: ORP controller, 600P pH/Ref Electrode, and ATC probe.	$339
3671 ORP Controller	$225
600P ORP Controller pH/Ref Electrode Industrial pH sensor: epoxy with BNC connector. Comes with a 3' cable. Max Temp. 60º C	$50
600E-ORP Industrial ORP Transmitter Sensor Industrial ORP sensor: epoxy with BNC connector, Max Temp. 60º C, 3-ft cable.	$75
3671A ATC phono plug Glass, Pt-100 with Phono Plug, 30 Inch Cable	$69
RELATED PRODUCTS
3675 pH/ORP Controller	$305
PC300 ORP Controller	$835

Global Water Instrumentation, Inc. • 11390 Amalgam Way, Gold River, CA, 95670, USA • 916-638-3429 • globalw*globalw.com
© 2007, Global Water Instrumentation, Inc.

Web page optimized by Helms Web Consulting.